Delightful Metal Buildings Square Tubed Buildings and RV Carports

JM BUILDINGS & CONSTRUCTION LLC

Delivery & Install included. Washington & Oregon only Note: Scheduling, delivery, and installation of Square Tubed buildings are handled by the manufacturer. JM Buildings services Washington and Oregon. Metal building projects often have faster build times than stick built, get your project started today!

Why Square tubed Metal Buildings?

The square tubed Metal Buildings styles are the most economical and versatile of all the metal buildings we sell. Square tube design can be used to create Carports, RV Carports, Garages, Barns, Loafing sheds, and Single Slope roofs/Lean to’s.

  • Metal Buildings Can be installed on ground, gravel, concrete, or Asphalt.
  • Square Tubed buildings can be built to local building codes if needed- Engineered drawings are available for an additional cost
  • Available in 14 gauge & 12 gauge square galvanized framing & 29 gauge powder coated steel agricultural sheeting.
  • Available up to 30′ in width & as long as you’d like!
  • 10 colors to choose from!

Standard Metal Buildings come 14 gauge framing, 3:12 pitch, 4’ on center leg spacing, and center bracing on each truss. Corner bracing is not standard but will be added onto each estimate as they are necessary for Pacific NW weather.

The vapor barrier is offered to prevent condensation and is highly recommended when a building is enclosed on 3 or more sides. These are our most affordable Carports, RV Carports, Barns and Garages you can buy!

ROUND HORIZONTAL METAL BUILDINGS

Round Horizontal roofs are the most economical style available! Rounded corners have been the most popular choice for decades. The regular roof has no trim on your eaves, ridge cap, nor purlins (hat channel) making it a cost effective option. Standard roofs are best used in areas that experience fair weather year round.The paneling runs horizontally front to back, draining water to the end of the building- because of this the longest length available is 31′.

A-FRAME HORIZONTAL (Boxed Eave ) METAL BUILDINGS

A-Frame Horizontal roofs allow for a more residential look to your structure. More easily mirrors the existing roof-line of your existing structures while still among the most affordably priced projects. The A-Frame Horizontal roof also drains front to back like the Round style, so the longest length available is 31′. The sheet panels run from side to side and does not have purlins or ridge cap. The increase in price to upgrade to A-Frame Horizontal is the additional box eave trim on your sides and the additional welding needed on your trusses

A-Frame Vertical Roof Style METAL BUILDINGS

Best for areas with extreme weather

A-Frame Vertical roofs are the strongest, and easiest roof to maintain- this is because the water drains to the side of the building. Vertical roofs are ideal for high snow areas, forest areas, and any building longer than 30′ in length. Vertical roofs are the only style that gutters & lean-to can be added onto.

JM Buildings Metal structures near me

INSTALLATION REQUIREMENTS & IMPORTANT FACTS

Before you build: It is the customer’s responsibility to locate and inform the installers on site of any underground cables or lines of any kind. Power lines must be 10’above the peak of the roof or be deactivated during construction. Make sure building site is clear of any tree limbs that would obstruct constructions before the installers arrive. Installers require a minimum of 24” of the room all the way around the structure. If there is less space available, please send detailed pictures of the installation site. (Exceptions will be considered on a case-by-case basis).

Metal Buildings Site: Land MUST be leveled within 2” side to side, and front to back. If the installers arrive on-site and the surface/foundation is not leveled there will be a labor charge applied to the final balance. If your building surface cannot be leveled, please send pictures and a detailed description. Labor Charges: Any Site improvements, leveling, evacuating, etc. performed by the contractors will be billed separately to buyer and buyer agrees to pay for such improvements. The buildings site must be within 100’of where the crew must unload, otherwise, additional fees will be added. Vapor Barrier: We offer a vapor barrier at an additional cost. The vapor barrier is recommended on the roof of all structures enclosed on 3 sides or more. Buildings that do not have a vapor barrier may condensate. Build Overs: If the structure is to be built on any wall, dock or other bases 12” + off the ground or over an existing structure, there will be an additional charge. Please send pictures & information! (Examples; RVs, Hot tubs, propane tanks, kennels, Stem walls/concrete runners, ecology blocks, etc.)

Building to Code/Certified Buildings:

We will not be responsible for any permits or restrictions. Building to Code CAN change the cost of the building (Engineered drawings, additional anchors, and additional materials depending on requirements) Building permits if Required: are the sole responsibility of the purchaser. Please refer to your local building department for more information. If you’d like a price on a certified building, please supply your Required ground snow PSF & Required Wind gust MPH.

If you choose not to order a certified building you agree to hold Harmless JM BUILDINGS & CONSTRUCTION from any action including but not limited to any costs related to and including,

Engineered drawings, additional anchors or materials to meet requirements, permits or restrictions.

Note: The manufacturer will not be liable for building collapsing or sustaining damage due to wind or snow on non- certified structures.

Wind Anchors/Ground Supports: Additional wind anchors/concrete bolts are required if the customers want their building to be certified. If your ground is excessively rocky/hard, where the installers are unable to install anchors, a restocking charge may apply.

Double Legs: Are required on all buildings 13’ & Taller and may be required on buildings requiring high wind certifications. A Telescopic forklift with a reach of 19’ is also required on all buildings 13’ & Taller.

Local Requirements: JM Buildings makes every effort to provide accurate estimates. However, customers do not always supply us with all the information necessary. We will not be responsible for price changes due to new information.

Island Installs: Delivery to islands without bridges may have additional charges.

A final note

Local Requirements: JM Buildings makes every effort to provide accurate estimates. However, customers do not always supply us with all the information necessary. We will not be responsible for price changes due to new information.

Island Installs: Delivery to islands without bridges may have additional charges.

Authorized Dealership: We are an authorized Dealer for Itiel’s Metal Buildings. Our prices are set by the manufacturer, there are no markups and no middleman fees.

Ordering: To place an order a 12-15% deposit is required with a signed invoice. The remaining balance is due at installation. Deposits are non-refundable- for circumstances allowing a refund a $25 processing fee or 10% of the deposit paid would be non-refundable for services rendered.

Ordering: To place an order a 12-15% deposit is required with a signed invoice. The remaining balance is due at installation. Deposits are non-refundable- for circumstances allowing a refund a $25 processing fee or 10% of the deposit paid would be non-refundable for services rendered.

Scheduling: Once your building is ordered the scheduling team will contact you 3-7 days prior to install with the day and time window of your installation. NOTE: Delivery is included in your price, delivery times are approximate. If the installers finish a job early, or if the install prior to yours was delayed for any reason (Un-level ground, weather conditions, etc.) they may show up early or later than the time window given. Delivery times vary by time of year (August-March expect longer than usual delivery times).

Complaints & Repairs: If you are not completely satisfied you must contact JM Buildings & Construction or the manufacturer within 30 days of the installation date.

Questions: Please direct any questions to [email protected] .